top of page
SAGE/EBR M1A Airborne Steel Scope Mount

SAGE/EBR M1A Airborne Steel Scope Mount

SKU: 140016

SAGE M1A Airborne Scope Mount - Part No. 140016
Scope Mount weighs 8.1 oz.

Precision milled from a solid bar of USA made 4142 prehard chrome-moly steel. Core Hardness is 26-32 Rockwell C-Scale.  After machining it is nitride case hardened and manganese phosphate finish.  Rigorous multiple point final inspection process insures a quality fit and function.  Each mount comes with all mounting hardware, fasteners, hex wrenches, and detailed instructions.

In the case you have installation problems, a receiver inspection kit is included to help measure the receiver groove to varify it was milled to original USGI specifications. If the receiver groove is good, then you can be assured the Sadlak mount will rest flush and square against the left side, providing maximum surface contact  to prevent the mount from shooting loose so you can enjoy the finest scope mount made for the M1A. On the rare occasion that the receiver groove is undersized or not deep enough, or there is a question regarding the measurements or other installation troubleshooting questions , please email to


! Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to (CA Health and Safety Code Section 25249.6).


bottom of page