Now, with our new custom fitting service, every M1A owner can have the same perfect fitting scope mount as the military has on their USGI government inspected “original” forged M14 receivers.  It won’t matter if your M1A receiver was made to USGI specifications we’ll do the modification to the mount and make it fit perfectly.  

We’ve taken the trial and error out of the mounting process by developing an Inspection Kit that includes a detailed colored instruction sheets with diagrams plus two sizes of precision ground inspection pins.  The simple, at home, self-inspection procedure allows the M1A owner to verify if their M1A receiver’s left side groove is made to USGI specifications.   If it is not, you can easily provide us with your receivers exact left-side groove dimensions without having to ship us your rifle.  We will then custom fit your Sadlak Industries LLC scope mount for a service fee of $45.00 and guarantee the fit.

Our scope mounts are precision made to fit on M14 USGI receivers.  However, not all M1A receivers are made to these same tight specifications.  
   
Because the left side groove depth and width vary greatly between manufacturers, date of manufacture and  because of the demands from our military, we cannot realistically make our mounts with a “one-size-fits-all”  specification.  If we reduce the dimensions on our mounts to fit the worst-case M1A receiver, they will be too loose for the military and will not repeat zero.  We do not want to compromise the fit, reliability, rigidity and accuracy that prolonged use demand (ex. military).   Instead we make all of our mounts to fit precisely onto receivers that have been built to the original USGI blueprint specifications as most older M1A receivers were.   This way when our military requires the use of our scope mounts, we have available the quality product they demand.

Until now, the M1A rifle owner was the one who had to compromise.  In too many cases, we have seen the horizontal groove on M1A receivers not machined deep enough and the left side threaded hole not located correctly.   The result is a compromised fit between your receiver and the scope mount.

The Inspection kit is supplied free with any purchase of a Sadlak Industries LLC scope mount or, upon request, with any order over $50.00.  It is the simplest trouble-shooting tool available if you have misalignment problems when attempting to install a mount on an out-of-spec receiver.  These problems have occurred more often on newly manufactured M1A receivers.  Older M1A receivers have a better track record.  If you’re not yet ready to purchase one of our scope mounts but want to determine your receiver’s groove specifications, the Instruction Kit is available for $5.00 plus shipping.  We will credit you the kit’s cost toward any future purchase of a Sadlak Industries LLC scope mount - so you can’t lose.

When you buy a scope mount from Sadlak Industries you not only get a precision product but the service to back it up.  Our military doesn’t compromise, neither should you!